Best LED Grow Lights 2017: Top rated bulbs & deals

Researching about best-rated LED Grow lights have become easy with our review guide. Below are the most recommended ones that are easily available to purchase online.

 

LED grow Lights

Affordable & Best LED Grow Lights available to buy now:

Advanced Platinum Series LED Grow lights are available in three variants:

LED Grow Lights P900 P600 P300

The all three models from the Advanced Platinum series are full-spectrum lights that are actually perfect for any type of vegetation.

Review & Specs of P900 – 1000W Grow light:

LED Grow Lights P900 P600 P300

  • 3X Intensity
  • 12 Bands of light wavelengths (Infrared to Ultraviolet)
  • Comes with two switches mode “Veg” and “Bloom”
  • 90degree angle lens
  • Consumes 515Watts of electricity that will cost around 12 cents per hour
  • Max coverage 3 x 5 feet to 4 x 6 feet
  • Enough to give light to 12 to 24 cannabis
  • Comes with 5 year warranty

Review & Specs of P600 – 600W Grow light:

LED Grow Lights P900 P600 P300

  • Most recommended LED Grow light per its performance and price ratio
  • Covers area around 2 x 5 feet, enough to light up 5 to 10 plants in one go
  • Has powerful inbuilt fan that prevents high-temp scenarios
  • Comes with dual switch mode “Veg & “Bloom”
  • 5 years warranty

Review & Specs of P300 – 300W Grow light:

LED Grow Lights P900 P600 P300

  • 11 bands spectrum wavelengths
  • Consumes 180 watts of electricity, roughly costs you 4 cents per hour
  • Contains assembly of 3W LEDs
  • 60Degree to 90Degree lens angle can be achieved
  • 5 years warranty

G8LED MEGA LED Grow Light Series:

G8LED 600 Watt MEGA Led Grow Light

This series of Led Grow light is awarded as best Led Grow light in 2016, and of course it is possess one of the best possible performance. It is available in two variants:

G8LED 600 Watt 450 Watt MEGA LED Grow Light

600W Model offers 8-ban wavelength (IR to UV), remains cool even with 24 x 7 usage, so these are perfect for weed growing. On other hand, 450W models also posses the characteristics of bigger brother and offers 8-band wavelength feature.

LED Grow lights are not new in the market; earlier HID HPS lights lamps were used in grow room, which had serious problems like ballast, high running temperature and course the price. And, now you have an easy go with LEDs, as they are cool source of energy however, due to the high wattage you may expect little heat, which should not affect your vegetation at all.

Let’s start the guide for choosing the best LED grow light:

1.) Estimate the area that you want to cover with the grow lights

Tip: Take the measurement of your grow room, and depending upon the room measurement you should be able to calculate which light will be better for you

2.) Budget

Tip: If your budget is not much for buying a full spectrum grow light then you may settle on the grow LED bulbs as they are cheaper but you can’t expect to cover a big area or commercial results.

3.) Angle of the LED Lens

Depending upon the budget for the lights, you may be looking at a specific range of LEDs however while buying please ensure the angle of Lens of the grow light because small angular LED lens light for growing vegetation will only cover a smaller area.

Angle of lens is directly proportional to the area, if the light lens has greater angle then it will be covering more area, however, on the same time your plants will not get direct light. So, choose wisely per the vegetation you are planning to grow.

4.) Do you actually require the multiphase grow light?

There are various type of lights are available in the market. And in case if your plants or the vegetation that you wish to grow require full growth cycle, then go with the full-spectrum grow lights.

Reasons to buy multiphase / full-Spectrum LED Grow lights:

  • Technologically advanced and cost efficient to run
  • No cooling system required
  • Long life of lamps up to 60,000 hours
  • Easy to service
  • Doesn’t flicker or require the ballast

If you’re a beginner for Indoor plantation and want to learn from the beginning, so below information will help you.

What is a LED?

The term LED means Light Emitting Diodes. Nowadays, there is a lot of demand for LED lights. These lights are used for numerous purposes such as lighting in bulbs, lamps, remote control, electronic appliances, watches and others. One of the essential features of LED Grow light bulbs is that they fit easily into an electronic circuit due to their small size. These bulbs have a long life and are now considered as a highly efficient source of light.

The other things for which the LED lights are being used nowadays is in bicycle lighting, billboard lighting, domestic purposes, railway signals, flashlights, decorative lights, Christmas lights, display lights, tail lights, car lights, stage lights, etc. The multi-purpose use of these lights has made it a globally used product. It helps to preserve the environment and save money as well.

LED Grow lights

Ideal for being used for commercial as well as personal use, the LED plant lights have become easy for the end users. The light of these bulbs helps in the growth of the plants inside the house where there is a lack of sunlight. The light helps to accelerate the growth of the plant as it assists in the process of photosynthesis.

LED Grow lights is a NASA Technology

Several other indoors growers and amateurs have recorded that they’re growing indoor using LED grow lights. And, yes led grow lights help create optimum growth and return. Below you may find more detailed info regarding the vegetative growth phase of a plant’s growth cycle.

For optimum growth and return you need to employ your LED grow light correctly and follow most exceptional growing practices. The most significant mistakes people make with LEDs are overwatering, using a lot of nutrition, not having sufficient light rather than putting the light at the appropriate distance. If you don’t supply your working place with adequate light policy, you can anticipate less than strong growth. In the same way, incorrect light positioning is not going to have excellent outcomes. Putting a light too near will stunt growth, too much will cause extending. Stick to the suggested coverage regions recorded on the Details Page of every light for optimum light penetration and protection. Bear in mind that there are numerous factors to indoor growing, which means you might choose to add or eliminate some light based upon your particulars.

You may even keep the plants below 24 hours of light, and they’ll continue to grow within this phase. On the other hand, the suggested growth cycle is 18 hours of light through the vegetative growth phase. This light cycle will make an environment which mimics the photoperiod at summer time with extended times. At the vegetative phase, plants require less extreme lighting than at the flowering phase. It’s through the vegetative growth phase which cloning, transplanting, pruning, and bending are all initiated.

Switch your LED grow light ON for 18 hours every day and then turn the light OFF and then leave your plant in the dark for the following 6 hours. Your plant will require four to six months of the cycle to be prepared to initiate the flowering phase. Pre-flowers would be the first sign that the plant is prepared to move into another phase of growth. The pre-flowers grow at branch internodes just supporting the foliage spur in around the fourth week of vegetative growth, once the plant is just six to eight months old. When you begin seeing pre-flowers forming this usually means that the crops are prepared to go in the flowering phase. It’s possible to continue to grow in the vegetative growth phase or change to flowering now. The pre-flower resembles a normal female blossom with white fuzzy pistils. The pre-flowering may choose from one to fourteen days.

Flowering using LED Grow Lights

In nature, flowering happens in the autumn, following the long hot days of summer. The long nights and short days of fall indicate the beginning of flowering. As soon as you’ve triggered flowering for one or two weeks and livelily begins, it may last can endure eight months or more.

Blossom formation is rapid initially then slows. Phosphorus and potassium uptake boost to encourage floral formation. Your nutrients should consume less nitrogen and more phosphorus and potassium during flowering. Do not give nutrients too frequently since this may cause your plant to acquire nutrient burnt. You need to use about 30 percent less nutrition with LED flowering grow lights in comparison with MH/HPS systems. Don’t overwater and don’t harvest too premature.

Flowers initially appear close to the top of this terminal growth and slowly grow on lower branches beginning at the strategies and going downward. Flowers have white pistils that seem like hairs. These clusters are called a leading or cola. The calyxes form grow rapidly for the first four months, and they grow at a lesser pace. Must of this crop weight is subsequently placed over the previous a couple of months of growth once the calyx formation has slowed that is the reason why it’s so important not to harvest too early since the vast majority of your return comes the past couple months. After this happens, you’re prepared to harvest your plants.

Proper Distance to Hang Total Spectrum LED Grow Lights

Maintaining the appropriate distance between your whole range LED grow lights along with your crops is important to strong photosynthesis and growth. Plants will achieve for the much-coveted light source exactly as they grow towards sunlight in outside conditions. The general guideline is to increase the distance between the surface of their plants’ canopy as well as the light source because the light becomes even more extreme. This usually means that hydroponic LED grow lights of distinct power ratings will function best at various distances.

Particular hanging space recommendations are found on each item page. Keep these distances as your crops grow at the vegetative phase. For plant extending increase the space in the plants into the light. For shorter, bushier plants reduce the space. As you increase the light, the crops will achieve to your origin and grow taller. If you maintain the light mended, the crops will grow tall into a specific stage, then grow wider and much more compact. Putting lights too near the plants could be too extreme and stunt growth and make discoloration. It’s ideal to adhere to the recommended distances and fix as required. During hammering the lights could be left in constant space.

Because LED grow lights emit 90 less heat than conventional HID lightings like high-pressure sodium or metal halide bulbs, your plants won’t dry out or burn off if you chance to set your LED grow light to near your plants. Within a week you’ll realize that your plants aren’t experiencing strong growth and the leaves may become discolored. Should you encounter this outcome, fix by increasing the space between your light and the crops. Stick to the recommended hanging spaces along with your plants will flourish on your grow room.

The advantages of LED grow lights

Energy consumption:

The LED grow lights reduce the damage caused to Earth due to its effective quality. It helps to save more than 75% of energy consumption. The other types of lighting systems that we use have more of running costs as compared to these LED grow lights. Thus, these lights are more efficient as they use around 100 watts of power.

Compared to the traditional lights, these lights work for a long time and have an approximate lifespan of about seven years. As these LED lights help to reduce the energy consumption and save natural resources, they are indeed an excellent lighting system for domestic purposes.

Efficiency:

These LED plant lights show a better result when they are used to enhance the growth of plants. Because of the wavelength of light emitted from them, the growth process of the plant gets accelerated. The traditional white light bulbs do not provide the proper wavelength required to conduct the process of photosynthesis. Also, the traditional light bulbs produce more than 80% of heat when light which can be harmful to the plants.

Less heat:

As these LED grow lights produce less heat, they are not harmful to the growth process of plants and flowers. When touched, these lights are warm. Thus, these lights help to grow plants and flowers of various varieties less than one roof with the right humidity required for it. The less heating ability of these LED Grow light bulbs will help to reduce frequent watering. Besides, the less heat will not warm up the room which will in return help to save energy as you will not have to use any cooling system later on to reduce the temperature of the room.

The future of Hydroponics systems is with LED Grow lights

The demands for LED grow lights have increased during the last few years mainly because it is a safe option when compared to the traditional lights. The LED lighting is a good source of artificial light for plants. The light is eco-friendly and is cheaper as compared to the traditional white lights.

While the LED Grow light bulbs have the advantage of being long lasting, they are also energy efficient. The normal lighting system contains mercury, which is harmful to humans as well as environment. Mercury is considered to be one of the worst pollutants in the world that is harmful to humans, wildlife and plant life.

But when you get LED lighting system, there is no risk of putting yourself in danger as these lights do not contain mercury or any other heavy metals. The practice of growing plants without using soil is named as Hydroponics. As the users have greater control over the conditions such as light, heat and nutrient levels, most of the hydroponics systems in used indoors.

The growers can thus precisely control the growth of the plants in the absence of sunlight. Plants just don’t require any light for their growth. Water, nutrients, and warmth are also important in the growth of a plant along with proper lighting. So LED grow lights are ideal as they provide the right and specific type of lighting system required for the growth of plants.

By using the standard electric systems to grow plants is currently too high. As the standard electric system emits more of heat than light, 90% of the electricity used goes to waste, as plants require light for growth. Later, a cooling system will have to be used to cool down the temperature of the room, which will be expensive for the user.

Besides, the fluorescent and HID’s are noisy and require high voltage, which again becomes expensive for the user due to high-energy consumption rates. Thus, the use of LED Grow light bulbs helps to get the desired light to grow plants. These LED grow lights also eco-friendly and required less energy. They emit light and not heat. The light aids plant growth and helps the cultivators to grow plants indoors.

Comparison between Brightness and Light Intensity

People also get confused as the standard fluorescent and HID lights look brighter when compared to LED lights. But it is important to understand that the LED Grow lights emit the correct light wavelength that is required to grow the plants and flowers at an optimum level. The HID lights emit more of green and yellow spectrum light that makes the human eye feel that the light is brighter.

But these spectrum lights are unnecessary for optimum plant growth. The LED grow lights emit light that is absorbed by the growing plants for photosynthesis. The LED grow lights have an efficiency rate of 95% as compared to traditional lights that have an efficiency rate of about 5%.

Benefits of using LED Grow lights over other lighting systems for growing plans

Light emitting diodes (LED) grow lighting system helps in growing plants indoors. The LED grow lights have their basic electronic structure that can be adjusted as per the lighting spectrum needed to optimize the growth and flowering of plants. The LED lighting system wass invented by the engineers of NASA. The spectrum of blue, orange and red was developed by NASA to grow plants on the international space station (ISS).

Some long stays on the ISS and for researching on food production on trips to another planet, the astronauts needed to thus produce their food. The LED grow lights are super-efficient and produce a low amount of heat. These LED lights create the exact wavelength for plants to grow and produce food. It is believed by most of the lighting experts that the LED lighting will soon replace other lighting sources such as HID and fluorescents.

The LED grow light bulbs help the user to cultivate and grow plants indoors. They are eco-friendly and highly efficient as they do not consume much of energy. These factors have contributed in making the LED grow lights popular in the last few years and have turned these into a safe option for indoor cultivation of plants compared to traditional lighting. The LED lighting is the best source of artificial light to grow your plants.

Now you can make high-intensity white LEDs (WLEDs)

Utilize one LED that emits three main colors of red, blue and green and combine the colors perfectly to make a white lighting. Moreover, the multi-color LEDs, the forefront of LED development as with the ideal tweaking they could provide almost any shade light we need by mixing primary colors.
Or use a phosphor established semiconductor substance to convert a blue or possibly a UV light to the wide or complete spectrum white light that your plants need. All these WLEDs are known as phosphors based white LEDs That Are also the easiest to fabricate and hence the cheapest to purchase;

There’s a third way of earning white LED grow lights with zinc selenide (ZnSE) however that is in its first phases. The vital difference between WLEDs is how strong their color stability, color manufacturing, and luminous efficiency are crucial. Color rendering index, CRI, essentially means how frequently the color is generated, you might understand the word from utilizing Photoshop. While glowing efficacy is discussed in the future. If your LED grows light is assembled using LEDs from brand name suppliers like Cree or even Bridgelux, then those problems will likely be minimized and trigger a small effect. It’s much simpler to find great solid color rendering and luminous efficacy together with the multi-color or RGB white LEDs.

There are lots of commercially available LED units which have spectra especially balanced LEDs for your grow room. This is Usually accomplished with a mixture of blue and red then white, ambers and far-red ranges to ensure that they cover the Whole spectrum;
So there’ll be peaks and troughs in the spectrum made instead of a continuous full or wide spectrum. All these ‘6, 11, 12, etc group’ products function in certain but not all of the spectrum necessary for a robust, rapid, massive yield harvest. These Aren’t complete spectrum grow lights;

Were you aware that LEDs are at present available is extremely short wavelengths with close UV 375-395 nanometres and much more costly versions that reach wavelengths closer to 240 nm? The complete wavelength depths of LEDs are called ‘profound UV’ with labs utilizing diamond to make 235 nm, boron nitride in 215 and aluminum nitride right down at 210 nm.

LED efficacy versus HID lamps

LEDs are ‘luminous efficient’so that they create visible light very effectively from power. For instance in 2002 Lumileds made a 5W LED using a luminous efficiency of 18 — 22 lumens per Watt, compare this to the conventional incandescent bulbs that at approximately 80 Watts provides 15 lumens per Watt (lm/Watt). Nichia published a white LED 140 lm/W at 2010. Since that time Cree have increased up to that right to 254 lumens per Watt with the Cree XLamp® that utilizes silicon carbide technology and operates at 350 mA. Note that these characters are in controlled labs and therefore are just the processor, so in actual life following the LED has its plastic casing and is mounted those amounts will be a lot lower but they’re still better compared to HPS lamps with standard HPS lamps operating at roughly 100 lm/Watt.

Nowadays, very good LED grow lights will spare a grower around 50 percent off their electric bills. This installation provides better but similar climbing into some 1000 Watt HID (HPS or MH) that also needs a 150 Watt ballast. So once you include the ballast and possible venting system that the savings are much more like 60 percent or longer.

LED grow lights versus Traditional HPs lights

Earlier, people were upset as there were low yields and small fruits from their cultivation. But since with the arrival of LED grow lights in the market, there is a growing progress with large yields and large fruits readily achievable by people now. There is a comparable result between the LED grow lights and the High-Pressure Sodium (HPs) lighting.

How is there so much of difference in the results produced by LEDs and Hps regarding both yield and fruit size? There is now an advanced development of Led lights that have a high power and advanced heat dissipation systems that allows the LED diodes to run at higher voltages. The right intensity of light along with perfect dispersion pattern in the newest LED grow lights has made explosive growth in vegetables and fruits possible.

This is possible now as these new LED lights come with double or triple optical lens fitted in them. The introduction of specialized wavelength combined with the high power LED diodes are the factors that have made these new LED lights more efficient than the rival light output of HPs.

The new LED grow lights come with the entire light spectrum and include Blue, Red, green, Orange, Yellow, Ultra-Violet, Infra-Red and white due to the new specialized wavelength and ratios as compared to the early lights that had a limited spectrum and included Blue, Red and sometimes Orange.

Increased yields and large fruits are now possible due to the range of wavelengths that now can be turned into specific rations. The ability to alter the wavelengths and ratios allows the grower to control over the LED grow lights performance which ensures that the grower can tailor the LED grow light bulbs exactly as per the need and requirements.

The new LED grow lights that have double or triple optical lenses fitted in them not only help to get the right light intensity and sound dispersion but also help in full utilization of the light produced because of the particular magnification on the optical lenses. These lenses have the capability to increase the light intensity at very high levels which helps to spread the light in every direction as per requirement by using the spread angles.

So, the plant which is in the lower branches also receives the lights footprint effectively. There will be excellent tolerance in the future LED wavelengths with the two critical areas of LED diode wavelength tuning and optical lens technology improving further. The LED diodes will help in providing exceptional possible results in future as these will provide the plants with the exact light at the reactive points.

There are many areas of improvement in the lens technology that is still in its initial stage of development. As the time passes by, this area of technology will improve and gain the potential importance. The LED grow lights will stay in the market for many more years to come and with further development and advancement in the LED technology; the future of LED lights will indeed be bright.

LED vs HPS vs MH: Which one is best for plants?

A variety of growers attempted these inexpensive LED grow lights, just come away disappointed by the results. This was a result of how the lighting that they bought was simply not putting out enough wattage to present powerful growth, and that’s the reason they seemed so cheap for this appealing alternative.

But despite the elegance of LED grow lights and their amazing attributes many growers still get confused with the difference between LED and other kinds of grow lights like HPS and MH ones.

It’s hermetically closed and filled with gasoline. The practice of producing light occurs when the gas dissipates, similar to a typical lightbulb at a regular home.

HID bulbs are then categorized depending on the gasoline that’s used in them. The kind of gas used from the bulb determines the color spectrum and wavelength, so if you want another sort of light you need to change the bulb itself. Typically HPS lights are far more towards the red and orange color, which can be utilized during the flowering phases, whereas the MH bulb generates a blueish color, useful for your vegetating phase.

LED grow lights create light otherwise. The center of the LED bulb is made up of chip which immediately transforms electricity into light, producing far superior outcomes. Among the chief benefits of LED over HPS and MH lights is your flexible light spectrum. Together with LEDs you really don`t need to change bulbs to make light in another spectrum because it includes a fully flexible color spectrum for every stage of the plant’s growth.

LED grow lights differ in form and dimensions, presenting alternatives that match every grow area and position. Most high-end versions are formed as panels, however, in addition, there are versions shaped like saucers and pubs.

Emitters are just another facet that changes across versions. The most complex ones comprise ten emitter forms at several frequencies, whereas lower-end versions only have three or two.

The processors also play a huge role in identifying LED light kinds. The two chief approaches are to either comprise few but strong broad spectrum based processors, which range between 5 and 10 watts or to comprise a single LEDs with everyone shining in another frequency.

Obviously LED lights also differ concerning quality build, guarantee, and service, flexibility, luminosity not to mention the range that they pay.

The older school HID grow lights for crops can find the work done, but they’re extremely ineffective when compared to the advanced LED indoor grow lights.

  • LED directional lighting demands no reflectors

Brightness, as sensed by the human eye, is translated differently from plants. LED grow lights are directional, plus they provide light that’s inside the spectrum that’s readily absorbed by plants. Therefore there’s not any requirement for reflectors and not one of the light is wasted. This leads to maximum efficacy, optimum return, discrete performance, and significantly decreased electricity expenses.

However, this is simply a surface preview of LEDs capacities in comparison to HID lights. To completely grasp the chances you has to go to a deeper comprehension of exactly what LEDs can and the way that impacts the practice of growing plants as well as the returns.

  • Larger Yields

HPS has been formerly believed to result in larger yields, but today every respectable business cannabis grower has begun using LEDs. To make a very simple contrast – a 600-watt HPS light yields around 300 g for the distance its own light covers, which translates into half per g for every watt. In contrast, an LED grows light yields around 1.5 g per watt when using a lot less power to generate exactly the identical luminosity.

  • Longer Life

A normal HID light has a lifetime of near 10 000 hours, which could look to be an impressive amount but at the very long term LEDs are a better choice. A fantastic grade LED grow light could be perfectly operational from around 50 000 to approximately 100 000 hours. With this information in mind it’so simple to deduce that LEDs are more rewarding in the future and would have to be replaced much less frequently. It follows that you will desperately need to be concerned about altering the lights for a long time to come.

  • Heat Efficiency

HID lights are notorious for just how much heat they create. In contrast, LEDs are extremely efficient concerning heat control and may be placed much closer to the crops. This conserves the grower any extra costs to get a large and complex ventilation system. Apparently, models that contain larger panels or more diodes are specific to be warm but still not anywhere near as sexy as HIDs, nevertheless, touchable using bare hands.

  • Simple To Use

LEDs are extremely intuitive and simple to use, simply locate the perfect place, plug them and you’re ready to begin growing. There’s no requirement for any extra installments or drilling; all created straightforward and simple. HID lights usually require a good deal of alterations and preparation so as to be put nicely.

Plants take advantage of light in various spectrums during the various growth phases, so using all of that in 1 light is a good plus. It’s not necessary to change the bulb itself to find light in another color as you would have to do with HIDs.

  • Energy Saving

LED lights are absolute energy efficient and have to be replaced much less frequently compared to HID lights. This contributes to saved money and attempts. Furthermore, HIDs begin losing their brightness as time moves and have to be replaced even before they’re entirely done. LEDs, on the other hand, keep a continuous degree of luminosity for so long as they’re usable.

LED grow lights have come to be the smart selection for the cutting edge indoor grower.

  • The Verdict

We expect that this review of exactly what is different LED out of HID lights has been useful and has direct you to an end of that kind is more practical. HIDs are a fantastic tool ahead of the progress of LEDs, but the as the horticultural area is evolving growers desire more efficient and reliable instruments.

LED grow lights are unquestionably superior from a technology perspective but they also offer you a clear benefit concerning advantages for your grower — longer life, better outcomes, easiness of usage and adjustability are only a few of the characteristics. HIDs may be a feasible solution in some specific scenarios, but for aspiring growers that wish to attain terrific results LED is undoubtedly the best way to go.

Hydroponic systems:

Hydroponics is a system which enables crops to be grown by gardeners by utilizing water. The one thing that’s missing till this stage is an adequate mild. The choices are numerous, and it’s up to each plant grower to select which technology is most appropriate for his particular needs. Most grow systems which are employed in gardens can be utilized in gardens. Hydroponics as a kind of farming is getting more and more popular among anglers.

With the support of lights, gardeners can use any room to prepare a garden. Since new grow, technologies have emerged it’s also more rewarding to have a garden with LED grow lights users can save a great deal of power. Each of those systems has a group of consumers it is suited for. Fluorescent grow systems, as an instance, are acceptable for seeds and cuttings, whereas people who take hydroponics as a hobby due to results and the prices utilize incandescent lamps.

For farmers that see hydroponics as a company the normal way to go is HID (high-intensity discharge) develop lighting. These mature lights may vary from 100 g to 1000 watts in power, based on the requirements of a garden. From an environmental perspective, and keeping the maximum growth for your buck, the best possible alternative in regards to deciding on an increase light system for the garden, no matter in the event that you see it as a hobby or as a company, would be LED grow lights. This program is unmatched in performance nor performances costs. LED grow light systems are more economical to operate when compared to the competition, even though they do prove to have higher acquisition prices compared to other technology.

With a lifetime of hours of hours normally, LED grow light systems continue over 50 times greater than grow light systems. With a more substantial light emission efficiency and power consumption.

The benefits of using LED lights to grow plants of all types

  • The LED grow lights are highly efficient in transforming electricity into light as these lights use about 95% of the energy used to create light. The other lighting systems or the traditional lighting systems have an efficient rate roughly of around 5%. So this high-efficiency rate of LED lights helps to produce less heat and more light as compared to the traditional lighting system.
  • The heat emitted by the LED grow lights is just right and is less likely to burn the leaves of your plant. The traditional lighting system creates a high amount of heat that could lead to burning the leaves and flowers of the plant if the plant is in proximity to the bulb.
  • The less heat produced by the LED lighting system helps the people living in the house, office or apartment access the indoor gardening done by them. The LED lighting has enabled people to grow large amounts of organic food even in small spaces like a closet or basement corner, without worrying about climate or outdoor space.
  • The light produced by the LED grow lights is sent in a measurable direction. This type of lighting emits light in all directions due to which all the plants get an equal amount of light as required for the growth. The conventional lighting uses a 360 degrees angle to emit light while the LED lighting system uses a 120 degrees angle to emit light.
  • The LED lights produce low or no UV lights due to its unique design. The conventional lights produce a broad spectrum of light that the plants don’t require and can be harmful to the plants as well as people.

Things to consider before buying a LED grow light

Introducing a little bit of nature into your personal living space with the help of indoor plant or garden will contribute to introducing a real breath of fresh air to the room’s decor. Even if you have a small city apartment, you can still have your small indoor garden where you can grow some vegetables. But if you plan on to have an indoor garden then you need to even think about ways in which you can take care of this garden.

Some plants may not be able to receive sufficient light for their growth. So, it is important that you get the right type of lighting system to alleviate this issue. The traditional incandescent or fluorescent lamps were being initially used for indoor gardening purposes. But since the time the LED grow lights have been designed and manufactured, the use of those traditional lights has reduced to a great extent.

These LED lights have been made to grow the plants in your house without having to expose them directly to sunlight. So, you can have your private piece of the jungle by just using soil, water, and something to hold these things together. The best part about getting LED grow lights is that it makes it possible for people to grow plants in almost any place they desire.

The LED Grow light bulbs are energy efficient and use less electricity that will help you save a ton of money on electricity bills. Apart from this, they do not emit a tremendous amount of heat which contributes to maintaining the room temperature at moderate levels. The LED grow lights emit light of the right wavelength that accelerates the growth of plants.

How to get LED grow lights for the desired plant growth

Indoor plantation or farming is a source of income for many people as well as a hobby for some. In the case of insufficient sun light, it becomes difficult and challenging to grow plants. So, one of the latest innovation in this direction is the LED grow lights that serve as a great medium to provide light to the plants cultivated indoors.

There are many benefits of using these lights as compared to the other grow lights. The LED grow lights have a long lifespan and are energy efficient. Besides, they are eco-friendly also and are available in different designs and style. Moreover, the LEDs are available at low price and emit less amount of heat which in return helps the grower to not water the plants more often due to less evaporation.

These benefits and reasons are more than enough for you in motivating and encouraging your customers to consider getting LED grow lights. There are things that you must yourself know about these LED grow light bulbs before persuading your customers in purchasing these LEDs.

Specific wavelengths in LEDs:

The important factor that you should know is the type of wavelengths that the LED grow lights emit that accelerate the growth of plants. The plants have a requirement of specific wavelengths during their different growth stages. Plants require blue, red and orange LED lights for the various stages. So, when you know the type of LEDs that can be used in those stages, then you can easily get more sales as the customers will consider getting the LED lights from you. The customers will demand such products and you should be ready to address their needs.

Varieties of plant:

When the users decide to have an indoor garden, then at that point of time they require the advice and suggestions on the type of LED grow lights that they should purchase. Like for instance, a flowering plant may have needs that will differ from that of a non-flowering plant.

Similarly, fruits and vegetable plant require the different types of LED grow lights. So depending on the types and varieties of plants that the customer wants for the indoor garden, you will have to then give the right type of information to the customers to choose the best products as per the need.

The size of the indoor garden space:

Depending on the size of the place where the customer wants to grow the plants, the need of LED grow lights differs. The size of the space plays a very important factor in the growth of the plants. So you must know where the LED lights should be placed so that the plants get the desired light intensity for the growth process. The number of lights that are required highly depends on the size of the indoor garden space.

Other light sources in the room:

If there are other light sources in the room like the natural sunlight then the choice of getting the LED grow lights varies. So as a seller it is important to know about this and you should share the right information with the customers in this regard.

The basic things one should keep in mind before buying LED grow light

The list of benefits associated with the LED grow lights is big that includes easier setup, less energy consumption and water usage, a long-lasting time and others. But it is important to keep certain things in mind that will act as a LED grow light buying guide.

  • If you were using a HID setup that was of 800 watts, then it is recommended and suggested that you get LED lighting system of about 1200 watts for better light in the room. Is rest assured about the electricity bill as these LED grow lights are energy efficient and will not be heavy in your pocket?
  • In the initial stage of plant growth, the blue light may be a better option while in the later stages; the red light will be a great choice. So choose the right type of LED Grow lights as per the requirement.
  • You will want the LED Grow lights at the best price. While price is also important, you should not forget that the LED light offers a longer life span of around eight years. So spending little extra funds will not fetch you more expenses in the future.
  • Lastly, choose the right shape of LED light as per your plant’s growing environment.

Indoor gardeners well understand the importance of proper lights. Light is one of an essential component that a plant needs for its growth. The plant will not be able to mature to its full state and cannot yield fruits and flowers if it does not receive proper light. So, to grow plants indoors, the indoor farmers use LED grow lights now to provide their plants with light that they require for growth. The LED lights have more advantages when compared to the other counterparts, as the technology used in LEDs is more efficient and effective.

But when you go to buy LED grow lights, it is important that you pick a good one and avoid future problems. Although you may find that various companies sell LED lights that are worth the money and work, many others do not provide the right type of LED grow lights even at the same price. Sometimes it becomes difficult to choose and tell which LED lights work and which company is genuine or fraud. Thus, make sure that you follow the LED grow light buying guide to get the right type of LED light.

Grow lights tips for achieving the best results:

Everybody knows that plant needs light to grow. All plants require a combination of light so as to trigger the chlorophyll and begin photosynthesis that enables them to produce glucose in addition to oxygen. It’s this sugar that offers the fuel to the plant to grow and so is essential to the wellbeing and growth of a plant.

When growing indoors or in areas with limited all natural lighting like winter months at High Latitude Climates the organic light might not be adequate for several species of crops, and nevertheless grow lights offer a very simple and reliable solution. For this by allowing a grower supplement almost any natural light with artificial light which may trigger the plant and provide all the very same advantages of sunlight even in an otherwise pitch black area.

There are many distinct types of grow lights, however, the most frequent ones for indoor gardening would be fluorescent lights, higher intensity discharge (HID) lights and LED lights. Even though HID and fluorescent lights are the most frequently used by commercial growers that they may be quite costly and also to set up and operate. They also produce more warmth than LED lights so need heating.

However LED lights are demonstrated to boost plant growth and experiments by NASA considering how to grow crops in space shown that not only do LED lights emit the specific wavelengths needed to market photosynthesis but they’re also effective, durable and last longer than other light sources that are why LED grow lights are getting to be increasingly more popular even with specialist growers.

The best way LED Grow lights operate

Additionally, different species of plants may work well with various wavelengths of light.

Vegetables that grow best in full sunlight will require lots of light if they are to be grown inside, whereas foliage plants often grow best in color and may grow in normally using not as much light.

In 400-520nm that signifies the violate blues as well as a few green light, you obtain summit absorption by chlorophyll which promotes powerful photosynthesis and vegetative growth. From approximately 610nm to 700nm you’ve got light from the red wavelengths, and there’s a lot of absorption by chlorophyll. Also light in this variety promotes budding and flowering in addition to fruiting.

Great grow lights should use light in both red and blue wavelengths to offer you the complete equilibrium of light, which plants need for appropriate growth.

Dark Period

You might believe that providing a plant light 24 hours per day could be good, right, after all, light promotes growth. Despite this, too much light may be a terrible thing and may be bad for a plant just like mowing it. Plants have evolved to obtain sunlight but also demand a period of darkness also. When establishing indoor lighting, you need to attempt to mimic states, which they’d get in a pure atmosphere. You must, therefore, find out how much shadow that the particular plants you want to grow will need. Then make use of a timer so that the grow lights will turn on and off automatically to mimic the light states that those plants will probably need.

There are quite a few different LED lights, which will allow you to find the one best suited to your own plant’s needs along with your budget.

Warm your area for optimum results

The simple fact that an LED diode is indeed effective, they run cool and do not require lots of surplus gear to cool them. Additionally, it suggests that very little energy moves rancid, leading to very little surplus heat energy.

This mix of gasoline burns at very substantial temperatures to be able to generate the large quantity of light that these bulbs emit. The problem with this large amount of light is that a lot of this is wasted as a result of meager absorption rate of particular regions of the spectrum which are the maximum energy output signal and ends up as nothing more than excessive heat energy, and a lot of it. This heat energy is then absorbed by the plants and leads to unusable photons, which then translates into elevated surface temperatures on the leaves of crops.

Another thing affecting foliage surface temperatures is that the ambient temperature of this space. The surface of an HPS bulb may attain too much 750 levels and may heat up a room quite fast, even if it’s properly cooled.

The surface temperature of the foliage, and therefore the inner temperature of the foliage, can have a massive influence on the speed where the plant dissipates. Transpiration is the manner where plants control the motion of water from small pores in the leaves’ surface called stomata. The discharge of the water vapor throughout the leaves’ surface is that the plants mean of not just restraining rancid, but is also the method by which in which the plant cycles water and can revive its moisture feed through the main system. The water exiting the plant is what’s producing the power for the roots to attract in. Therefore, a plant which has healthy transpiration also has a healthy uptake of water through its root system. The fitter the uptake throughout the main system, the more nutrients that the plant can consume and used for accelerated growth.

Temperatures inside the foliage significantly influence transpiration. The warmer the heat, the longer it will transpire. Since the surface temps onto a leaf of a LED-lit space can average around 12 degrees colder than an HPS lit area, transpiration may slow, and therefore cause slower uptake from the roots and because of this sluggish growth prices.

As a result of this, Kind LED actively urges increasing the warmth of your grow to 82-85 levels when growing together with our lights. This will make certain that the stomata of your crops may completely perform their occupation and also allow metabolic procedures to keep uninhibited for strong growth.

There are other additional advantages from having the ability to run higher temps, but we will go over those in a different part of LED Tech.

At the past LED Tech segment we spoke about increasing the general ambient temperatures of the room to assist in transpiration. Now let us discuss a few of the biggest added advantages to getting those warmer temps on your area, higher efficacy of CO2 enhancement.

Carbon assimilation carbon or carbon fixation, is the method by which plants convert carbon dioxide in the air to make metabolically active carbon materials, like carbohydrates, by means of photosynthesis.

The capacity of plants to absorb carbon dioxide or assimilation, was discovered to quickly increase in crops as room temperatures have been raised to 82-86 levels, in accordance with the normal 72-78 levels recommended for HID lit grow chambers. This growth in absorption speed has an immense impact on growth rate and also on the dimensions of fruits and blossoms.

Things to be Considered while shopping a LED grow light

Since most of the first-time buyers encounter difficulty to pick the ideal LED grow lights to their plant’s unique requirements, our group of specialists offers these tips for picking LED grow lights. Here you’ll find all of the crucial information for making an educated selection and choosing the proper product and model.

The very first thing to do if picking LED grow lights would be to regard the harvest you’ll use these on. All goods available in the marketplace work for getting the plant into the flowering phase but certain ones are far better suited to specific crops. The LED diamond collection is acceptable for just about any harvest and especially great for growing cannabis on a complete cycle. The particular power or rating LEDs (wattage) you need to choose that depends upon the number of plants that you’re planning or wish to grow along with the grow space itself.

Selecting the Most Appropriate Kind Of LED Grow Light

Making the ideal choice usually means that you have all of the information and choice available. After speaking about how distinct lights are acceptable for growing different plants, it’s time to delve deeper in the kinds of grow lights.

For growing cannabis out of a seed and nurturing it through to the flowering phase, the best method is to receive a total cycle LED light. But you must bear in mind that in certain scenarios you’ll just have to utilize it to your vegetative and blooming stages.

Grow lights for cannabis and especially the ones that assist the plant during the flowering phase can be found in various versions, differing in a number of station lights. A single station light features off and on choices, whereas both channel versions feature different vegetative and blossom modes together with programming alternatives, which may be seen at each one of the high-end AdvancedLED versions. Additionally, the light spectrum is customizable to be able to give light in the proper spectrum for the specified growth period. This is the most recent phase in the maturation of luxury LED grow lights gear that’s setting the benchmark for the entire industry.

Another facet where lights differ is contour. You will find versions formed as bars, panels, saucers, and lightbulbs, appropriate for every need based upon the grow area and space, which leads us into the upcoming major question.

In LED lighting larger wattage won`t automatically translate into a larger area policy, as it is with routine HID, MH, and HPS lights, but it could still function as a fantastic rough estimate.

Plants and notably cannabis want most lighting throughout the flowering phase, so we’ll be using this as a quote of just how much area has to be coated. A normal LED grow light has to utilize more than 32 g per square foot of growing distance, but for optimal results, it ought to be more than 50 watts, up to 80 watts.

The Qualities Of The Ideal LED Lights:

When Looking for LED grow lights, our specialists recommend Searching for products that possess the following qualities:

High-Class Semiconducting Chip:

This is the center of any LED light, and consequently, it should be of high quality. The processor converts electricity into light and impacts the wavelength. Therefore an otherwise very good product, which employs an excellent bad chip, is still not great. When creating a buy search for models that utilize at least 3-watt processors, anything less than this won`t supply the essential luminosity.

Made in the United States

In Advanced LED Lights, we guarantee that the LEDs from the lights we sell are out of those US companies. Moreover, we confirm that our brand name merchandise lines possess the greatest BIN codes together with the colour and electricity inputs of the LEDs used in the grow lamp.

Low Heat Output

LED grow lights with reduced heat output supply the best value in two fundamental ways:

High heat output LED lights to have a tendency to fade and perspire faster than cooler LED lights which decrease both replacement costs as well as the time spent installing the new lights.

In Advanced LED Lights, we don’t create LED lights which are overdriven. Instead, our staff grows highly rated LED grow lights which maximize the attractiveness and health of your crops. Our LED lights create more heat, less maintenance, and also a longer life compared to other lesser quality solutions.

Easily Employed

Because your time is precious, the LED grows lights you select need to be readily installed. Additionally, you need to have the ability to adjust the height of the lights fast and easily, in addition to their color and intensity.

All attribute easy-to-use color and strength control to your own convenience.

Launched Record Of Success

In Advanced LED, we have proudly supplied the maximum quality LED grow lights for the previous seven decades. As a consequence of our exceptional quality products and support, we’ve got thousands of happy clients around the world. We intend to give lights, which don’t only work great but also persist for quite a very long time.

Reputable LED light producers like Advanced LED offer a guarantee that covers a minimum of 10 decades and we our specialist team advises one to pay for nothing less. Grow lights are a durable piece of gear and some other issues you may encounter will most probably act up after at least a couple of decades. It follows that any guarantee covering less than 5 decades isn’t usable usually. Particular versions even include a particular warranty that covers different components and pieces, together with a free yield alternative.

How to choose the Best LED Grow Lights considering the Space And Plants

Quantify your garden’s width and length. On every one of the product pages, you’ll discover the coverage regions of every size light. To ascertain a number of lights you’ll need, divide up your space into those policy areas. Core protection is your idea area for flowering plants, so use that metric to get many complete bicycle or flowering gardens.

Are you currently replacing additional grow lights, like HPS, or would you prefer to have the exact same or greater intensity of a specific wattage of HPS? If so, swap the lights with the following manual:

Is your backyard for vegetative cycles just, flowering only or complete cycle from seed to crop?

The Diamond Series, Diamond collection XTE, and Diamond Series XML are all made to grow crops from seed to complete crop, and they’re optimized for both flowering and fruiting plants.

By using this manual, you are going to decide on the best LED grow lights to your backyard. Full Spectrum LED grow lights are receiving increasingly more complex and placing the new lighting benchmark to the horticultural business. We expect that you’ve found the advice useful and can now make a more educated choice. The industry is saturated with many brands and products however we think that quality makes it so visible.

There are lots of myths about LED grow lights that are predicated on the incorrect interpretation of truth and inadequate knowledge about how they function. This guide is geared toward preventing this misunderstanding.

The very first step of describing heat emission in LED lights would be to define the procedure which makes them emit light. LEDs are little light bulbs incorporated in an electric circuit. What makes them distinct from regular bulbs is the deficiency of filament that’s prompt to burning out. LEDs rely solely on the level of electrons through a semiconductor to make light. Light emitting diodes last considerably more than normal incandescent light bulbs and also resolve lots of the heat problems linked to this latter.

Many consider that LEDs do not produce any heat, but that isn’t physically possible. LED lights produce heat because of minor deformities from the crystal portions of the diode. Not all of the power that enters the diode could be turned to light, and the remainder is exhumed as warmth. The lamp may seem cool to the touch. However, the warmth accumulates on the interior, and that is where the majority of the misconceptions about LEDs running perfectly trendy come from.

The power that passes through the diode that does not get turned to light has turned into heat. Because of the character of the substances which constitute the diode, there’s also large reflectivity inside of it that leads further to heat emission. Highly effective LEDs like the ones used in our production process can convert near 80 percent of the energy that goes in, meaning that 80 percent is the efficiency of getting it to convert into the light. Later, the light is then indeed emitted by the diode, but smallish parts of if it has changed into heat on account of the procedures explained previously. This underfloor heating system is subsequently re-assimilated from the diode. That is the reason why LEDs exhume warmth. The greater the grade of diodes and parts utilized, the more effective assimilation of both electricity and light emission. That’s why it’s necessary to trust brands which use only quality construct substances. In Advanced LED we provide only the maximum grade LED grow lights for indoor farming, setting our extensive expertise and knowledge behind each item.

One other important element to consider is the heat production is a sort of light absorption. When light is emitted in the grow lamp, it’s subsequently consumed by the plant or thing it reaches. This procedure transforms out the light into heat also. Since the Law of Conservation of Energy dictates, energy only changes its kind and can’t be dropped, so all light generated from the grow lights will either move into energy to your plants or become heat.

The question then is what would be the consequences of this emitted heat and just how LEDs can compare to additional lights with this spectrum?

In comparison to other sorts of lights, LEDs let off far less infrared radiation into the grow area. Have a peek at the next chart showing how infrared light peaks together with HPS lights.

Infrared Emission

HPS lights operate quite hot attaining a high in 53000F using a massive part of the heat shifting to IR radiation. Infrared is a contributing aspect to heat emission and leaves your plants warm as they get the light.

Less Watts Employed

In comparison, LED grow lights operate a whole lot cooler, with a maximum temperature hitting 1750F. This creates far less infrared beams and leads to less heat for those plants. This is only one of the chief reasons why LED lights could be put closer to the plants. Among the chief things that bring about LEDs, excellence is that they use fewer watts to create exactly the identical luminosity as other lights- fewer springs utilized means that there’s also less heat created.

Better Light Assimilation

LED light is much better assimilated by plants, which translates to improved efficacy –not as light to light is required to reach the very same effects as other lights. Combining this with the two variables we explained above a conclusion could be drawn about LEDs efficacy and heat emission when compared with HPS/MH/HID/LEC/CMH. To illustrate with a specific instance — a 1000 Watt HPS light could be substituted using a 600W LED light and effect in 40% reduction of heat emission.

In short, we could point out the 3 Major factors which assist LEDs to run cooler than any grow light kind available on the marketplace:

  • They allow out less infrared light
  • They utilize less horsepower than HPS/MH/HID/LEC/CMH
  • LED light is much better assimilated by plants
  • Yes, LEDs do emit any heat, but in contrast to other kinds of lights that they run a whole lot cooler and also don`t get quite as hot.

Heat Sink

Heat sinks are created so that they absorb the heat and stop it from going to the diodes. This is an essential part of the gear since it helps it survive longer, preventing any modifications in the light spectrum and emission. In Advanced LED we’ve developed a distinctive patented Double Heat Sink system along with also a ColdFlo Heat Dissipation technologies that decrease the emitted heat with over 50%.

That is what surplus warmth from premium quality lights may do to your crops.

After describing the heat emission factor supporting LED lights, we’d love to speak about a few of these things which you ought to check into before deciding a grow light version.

Weight

The thumb rule suggests that the thicker the light, the greater it’s. A fantastic light ought to be heavy since it comes with a nice, big heat sink. Should you choose a heftier version, be certain that you have the essential infrastructure to support that weight.

Straightforward Setup

A fantastic LED grow light ought to be intuitive and simple to install. In case you need to hang some extra pieces of equipment, reflectors or bracket some ballast for weight then you’re taking a look at the incorrect model. All Advanced LED versions are simple to mount and just have to get suspended and plugged in.

Picking The Proper Amount Of Lights

Just how many grow lights your buy must reflect the dimensions of your growing surgeries. Be certain that you confirm the light region and think about how close the crops will be to each other. For instance, a routine grow light should absorb 32 Watts to pay a square foot of cannabis during the flowering phase.

Easiness of Color Choice

Ensure that the version you decide on enables you to alter the color settings without needing to carry out any complex jobs. All of Advanced LED’s versions include a simple to use switch between the two various clone, veg and flower modes.

The company’s reputation:

It is important that you check the company’s goodwill and reputation before choosing the LED Grow Lights Company. Look for a Better Business Bureau Logo and make sure that when you click on this link on the company’s website, it opens and is not just a BBB picture to trick you. Always look for the company’s ranking on the BBB Internet site. The company should have a B+ or higher rating and 3 or less unresolved complaints of customers in the last one year. The company with a good ranking will probably offer good LED grow lights and is not tricking people.

Performance and quality:

When you have a sound idea and knowledge of LED grow light bulbs, then you will be able to somehow judge and get the right type LED grow lights at the right price. But when a person who does not have any idea goes to buy LED lights, a cheap LED light may be very similar and seem like a quality LED light.

Many believe that the price determines the quality of the things they are purchasing. But this is not true as sometimes a cheap quality product may be sold at a higher price. So don’t fall for the trap and if you are confused then ask the salesperson for a detailed explanation of the LED grow lights you want to buy.

Warranty/guarantee:

Always try and choose a company who is in the LED grow lights business with years of industry experience and sells quality lights with at least a two-year warranty. The guarantee also plays an important role. So make sure that the company you choose is offering a guarantee of at least 30 days that included no restocking or replacement fee and no other restriction on the reason for returning and refunding.

Above are the most recommended, and used Led grow lights, and soon we will be bringing more reviews. If you’ve any questions related to growing lights then feel to free to comment, and we’re here to help you best. Subscribe to receive Led Grow light deals directly into your Inbox.

Leave a Reply

Your email address will not be published. Required fields are marked *